Wireless Remote Controls
 Remote Control Products
 Custom Wireless Controls
 SPWCS Series
 WCS-900 Series
 WCS-24 Series
 WPC24-XL Series
 WPC900-XL Series
 WPC27 Series
 WPC27FB Series
 WCS-27A Series
 WHHC-27 Series
 WVC27 Series
 WCS24-MS Series
 WCS900/868-MS Series
 DRWC-24
 


 Company
 About Us
 Terms and Conditions
 Contact Us
 ImagineInstruments.com
 

 Wireless Remote Control Systems

 

Wireless Lighting Control Panel SPWCS Series - Solar Powered Wireless Remote Control System

SPWCS Series - Solar Powered Wireless Remote Control System are pre-configured, pre-wired and ready to install. This solar powered series provides a fast, economical solution for wireless remote control of pumps, motors or valves. Each pre-assembled unit features a complete solar power system, wireless transmitter/receiver module, circuit breakers, din-rail terminal blocks and control relays.


Wireless Remote Control Panel WCS-900 Series - Wireless Remote Control System

WCS-900 Series - Wireless Remote Control System are pre-configured, pre-wired and ready to install. Series provides a fast, economical solution for wireless remote control of pumps, motors or valves at a distance of up to 6 miles between the transmitter and receiver. Each pre-assembled unit features a 12VDC or 120VAC operation, wireless transmitter/receiver unit with 1, 2, 4 or 8 control lines, din-rail terminal blocks and mechanical or SSR control relays.


Wireless Remote Control Panel WCS-24 Series - Wireless Remote Control System

WCS-24 Series - Wireless Remote Control System are pre-configured, pre-wired and ready to install. Series provides a fast, economical solution for wireless remote control of pumps, motors or valves at a distance of up to 1 mile between the transmitter and receiver. Each pre-assembled unit features a 12VDC or 120VAC operation, wireless transmitter/receiver unit with 1, 2, 4 or 8 control lines, din-rail terminal blocks and mechanical or SSR control relays.


Wireless Remote Control Panel WRCS900-XL Series - Wireless Switch Control Panel

Series WRCS900 Wireless Switch/Control System provides a wireless bridge between any type dry-contact switch and a control relay. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 6 miles (Line-of-site) away. When the control box receives the proper wireless signal from the transmitter a control relay inside the panel is energized to operate a pump, valve or motor.


Wireless Remote Control Panel WPC24-XL Series - Wireless Switch Control Panel

Series WPC24-XL Wireless Switch/Control System provides a wireless bridge between any type dry-contact switch and a control relay. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 1 mile (Line-of-site) away. When the control box receives the proper wireless signal from the transmitter a control relay inside the panel is energized to operate a pump, valve or motor.


Wireless Remote Control System WCS24-OC Series - Wireless Remote Control System

The WCS24-OC Series Wireless Remote Control System allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless 802.15.4 communication. The transmitter is equipped with up to four contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Transmitter can be activated with dry-contact switches or connected to a PLC for automated control.


Wireless Remote Control System WCS900-OC Series - Wireless Remote Control System

The WCS900-OC Series Wireless Remote Control System allows for remotely activating equipment from a distance of up to 6 miles away using license free wireless 900 MHz communication. The transmitter is equipped with up to four contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Transmitter can be activated with dry-contact switches or connected to a PLC for automated control.


Wireless Remote Control System WCS2W24-OC Series - Wireless 2-Way Remote Control System

The WCS2W24-OC Series Wireless 2-Way Remote Control System allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless 802.15.4 communication. Each transceiver in the set is equipped with up to two contact closure inputs that are used to control open-collector outputs on the oposing unit. Models are available with 1 or 2 control lines. Control signals can be activated with dry-contact switches or connected to a PLC for automated control.


Wireless Analog Control Transmitter/Receiver System WACS-24 - Wireless Analog Control System

The WACS-24 Series Wireless Analog Control System allows for remotely monitoring or controling equipment from a distance of up to 1 mile away using license free wireless 2.4GHz 802.15.4 communication. Each set features either one or two analog signal inputs and outputs. Both the transmitter and receiver are equipped with one contact closure input that is used to control a open-collector output on the oposing unit.


Wireless Remote Control Panel WPC900-XL Series - Wireless Switch Control Panel

Series WPC900-XL Wireless Switch/Control System provides a wireless bridge between any type dry-contact switch and a control relay. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 6 miles (Line-of-site) away. When the control box receives the proper wireless signal from the transmitter a control relay inside the panel is energized to operate a pump, valve or motor.


Wireless Remote Control Panel WPC2W900-XL Series - Wireless 2-Way Switch Control Panel

Series WPC2W900-XL Wireless 2-Way Switch/Control System provides a wireless bridge between any type dry-contact switches and control relays. When a switch connected to one of the tranceiver units opens or closes signals are sent via a license free radio signal to a corresponding unit up to 6 miles (Line-of-site) away. When the corresponding unit receives the proper signal a control relay inside the panel is energized to operate a pump, valve, motor or alarm.


Wireless Pump Controller WPC27 Long Distance Wireless Switch/Control Panel System

Series WPC27 Long Distance Wireless Switch/Control Panel System provides a wireless bridge between any type dry-contact switch and an electro-mechanical contactor. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 6 mile (Line-of-site) away. When the pump control panel receives the proper wireless signal from the transmitter a power contactor inside the panel is energized.


Wireless Remote Control WCS-27FB Series - 27 MHz Wireless Remote Control System with Two-way Communication for Control and Feedback

WCS-27FB Series - Wireless Remote Control System are pre-configured, pre-wired and ready to install. Units provide a fast, economical solution for wireless remote control of pumps, motors or valves up to 8 miles distance. Each unit features AC/DC power operation, wireless transmitter/receiver module, circuit breakers, din-rail terminal blocks and control relays.


Industrial Wireless Remote Control System With Up To 16 Control Lines WCS-27A Series - Long Distance Industrial Wireless Remote Control System With Up To 16 Control Lines

WCS-27A Series - Industrial Wireless Remote Control System features up to 16 seperate control lines. Series provides a fast, economical solution for wireless remote control of multiple pumps, motors, valves or lighting equipment. Models are available setup with 1, 2, 4, 8, 12 or 16 wireless lines that control relays or contactors up to 6 miles away (Line-of-site).


Wireless Remote Control with Handheld Radio Transmitter WHHC-27 Series - Industrial Wireless Remote Control System With Handheld Radio Transmitter

Series WHHC-27 Wireless Remote Control System provides a wireless bridge between a handheld transmitter and a relay receiver control panel. When a switch on the handheld transmitter is pressed signals are sent via a license free radio signal to a receiver unit up to 2 miles (Line-of-site) away. When the control panel receives the proper wireless signals from the handheld transmitter 3 Amp control relays inside the panel are energized to operate remote equipment such as a pump, valve, motor, wench or gate.


Wireless Valve Controller WVC27 Series - Long Distance Wireless Valve Control Panel

WVC27 Series - Wireless Valve Control Panel is pre-configured, pre-wired and ready to install. Series provides a fast, economical solution for wireless remote control of one valve at up to 6 mile distance between switch transmitter and relay control receiver. Each system features 12VDC, Solar or 120VAC operation, valve status indicators, wireless transmitter/receiver module, circuit breakers, din-rail terminal blocks and control relay.


Wireless Remote Control System WCS24-MS Series - Wireless Remote Control Matched Set

Series WCS24-MS - Wireless Remote Control System allows for remotely activating equipment from a distance of up to 1 mile using wireless 2-way 802.15.4 communication. The transmitter is equipped with contact closure inputs, used to control relays on the receiver unit. Models are available with 5, 10, 20 and 30 Amp mechanical relays. Transmitter can be activated with dry-contact manual switches or connected to a PLC for automated control. Approved for use in USA/Canada/Europe only.


Wireless Remote Control System WCS900-MS Series - Wireless Remote Control Matched Set

Series WCS900-MS - Wireless Remote Control System allows for remotely activating equipment from a distance of up to 6 miles using wireless 2-way communication. The transmitter is equipped with contact closure inputs, used to control relays on the receiver unit. Models are available with 5, 10 or and 30 Amp mechanical relays. Transmitter can be activated with dry-contact manual switches or connected to a PLC for automated control. Approved for use in USA/Canada only.


Wireless Remote Control System WAS24-MS Series - Wireless Analog Signal Transmitter/Receiver

WAS24-MS Series Wireless Analog Signal Transmitter/Receiver Set allows you to install and connect a standard analog voltage or 4-20mA output temperature, pressure, humidity, flow, level or pH transmitter and send the readings up to 1 mile away by means of a wireless RF signal. Models also include 1 or two relays that can be used to add alarms or control to your system. Product is approved for use in USA/Canada/Europe only.


Wireless Remote Stop Switch Transmitter WRSS-24 Series - Wireless Remote Stop Switch Transmitter / Receiver System

Series WRSS-24 Wireless Switch/Control System provides a wireless bridge between a standard stop switch and a control relay. When the stop switch transmitter is activated a signal is sent via a license free radio signal to a relay receiver unit up to 600 feet (Line-of-site) away.


Wireless Remote Control System WPLS24-MS Series - Wireless Pulse Signal Transmitter/Receiver

WPLSS24-MS Series Wireless Pulse Signal Transmitter/Receiver Set allows you to install and connect a standard pulse signal output device such as a water meter, turbine meter or paddlewheel flow sensor and send the digital pulse signal up to 1 mile away by means of a wireless RF signal. Models also include 1 or two relays that can be used to add alarms or control to your system. Product is approved for use in USA/Canada/Europe only.


Wireless Remote Stop Switch Transmitter WRPBS-24 Series - Wireless Remote Push-button Switch Transmitter / Receiver System

Series WRPBS-24 Wireless Push-button Switch/Control System provides a wireless bridge between standard push-button switches and a control relays. When the push-button switch transmitter is activated a signal is sent via a license free radio signal to a relay receiver unit up to 600 feet (Line-of-site) away.


Wireless Din-rail Analog Control Transmitter/Receiver System WDRXL-24 - Din-rail Wireless Analog Control System

The WDRXL-24 Series Wireless Analog Control System allows for remotely monitoring or controlling equipment from a distance up to 1 mile away using license free wireless 2.4GHz 802.15.4 communication. Each set features either one or two analog signal inputs and outputs. Both the transmitter and receiver are equipped with one contact closure input that is used to control a open-collector output on the opposing unit.


Wireless Din-rail Remote Control Transmitter/Receiver System DRWC-24 Series - Wireless Din-rail Remote Control Set

The DRWC-24 Series Wireless Remote Control System allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless 2.4GHz 802.15.4 communication. The transmitter is equipped with up to four contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Transmitter can be activated with dry-contact switches or connected to a PLC for automated control.


Wireless Remote Control Transmitter/Receiver System WIDXL-24 Series - Industrial Wireless Remote Control Set

The WIDXL-24 Series Wireless Industrial Remote Control System for remotely activating equipment from a distance up to 1 mile away using license free wireless communication. The transmitter is equipped with up to 4 contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Units are activated with dry-contact switches or connected to a PLC for automated control.


Wireless Remote Control Transmitter/Receiver System WIDXL-2W-24 Series - 2-Way Industrial Wireless Remote Control Set

The WIDXL-2W-24 Series Wireless Remote Control System with 2-way operation allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless 802.15.4 communication. Each unit is equipped with up to 2 contact closure inputs that are used to control open-collector outputs on the opposite unit of the matched pair. Models feature 1 or 2 control lines. Can be activated with dry-contact switch or connected to a PLC for automated control and feedback.


Wireless Din-rail Remote Control Transmitter/Receiver System DRWC-2W-24 Series - Wireless Din-rail 2-way Transceiver Pair

The DRWC-2W-24 Series Wireless Remote Control System with 2-way operation allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless 802.15.4 communication. Each unit is equipped with up to 2 contact closure inputs that are used to control open-collector outputs on the opposite unit of the matched pair. Models feature 1 or 2 control lines. Can be activated with dry-contact switch or connected to a PLC for automated control and feedback.


Wireless Din-rail Remote Control Transmitter/Receiver System DRWC-900 Series - Wireless Din-rail Remote Control Set

The DRWC-900 Series Wireless Remote Control System allows for remotely activating equipment from a distance of up to 3 miles away using license free wireless 900 MHz communication. The transmitter is equipped with up to four contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Transmitter can be activated with dry-contact switches or connected to a PLC for automated control.


Wireless Din-rail Remote Control Transmitter/Receiver System DRWC-2W-900 Series - Wireless Din-rail 2-way Transceiver Pair

The DRWC-2W-900 Series Wireless Remote Control System with 2-way operation allows for remotely activating equipment from a distance of up to 3 miles away using license free wireless 900 MHz communication. Each unit is equipped with up to 2 contact closure inputs that are used to control open-collector outputs on the opposite unit of the matched pair. Models feature 1 or 2 control lines. Can be activated with dry-contact switch or connected to a PLC for automated control and feedback.


Wireless din-rail 4-20mA Transmitter/Receiver System DRWS-420 Wireless Din-rail 4-20mA Transmitter/Receiver

Model DRWS-420 Wireless 4-20mA Transmitter/Receiver Set provides a wireless bridge between any 4-20mA loop powered sensor and a 4-20mA input process monitoring or control Instrument. The 4-20mA analog current readings from a sensor connected to the transmitting unit are sent via a license free radio signal to a receiver unit up to 1 mile (Line-of-site) away. The receiving unit reproduces an accurate 4-20mA analog output that matches the 4-20mA signal.


Wireless din-rail 4-20mA Transmitter/Receiver System DRWS-420XL Wireless Din-rail 4-20mA Transmitter/Receiver

Model DRWS-420XL Wireless 4-20mA Transmitter/Receiver Set provides a wireless bridge between any 4-20mA loop powered sensor and a 4-20mA input process monitoring or control Instrument. The 4-20mA analog current readings from a sensor connected to the transmitting unit are sent via a license free radio signal to a receiver unit up to 3 miles (Line-of-site) away. The receiving unit reproduces an accurate 4-20mA analog output that matches the 4-20mA signal.


Wireless Tower Light Indicators / Switch Control Box WTLBC - Wireless Tower Indicators / Switch Control Box

The WTLBC Series are Multi-color Tower Lights mounted onto a rugged plastic enclosure with wireless operated industrial control switches. Versions are available with an attached switch box or a remote cable between the light assemblies and wireless switch control box. Two different wireless ranges are available with control distances up to 1 mile (LOS). Features include stainless steel mounting brackets, rotary or push-button switches and terminal blocks for power connection. Operating power options are 12V DC, 24V DC or 120V AC.



Caution: Do not use Imagine Instruments LLC wireless products in any application where false, blocked or missing signals could cause injury or property damage. It is the responsibility of the user to add redundancy into the system so that the failure of any one component does not result in injury, loss of life or any form of property damage. Wireless systems should only be installed and maintained by trained professionals.
 

Copyright © 2014– WirelessRemoteControlSystem.com TM , Imagine Instruments LLC, All Rights Reserved.

 


wireless remote control system,